Lat Works Logo

Lat Works Construction

Serving Brooklyn, Queens, Manhattan, NY

Strength

Force Simulation Masonry Out‐of‐plane Failure

This paper presents the results of a study on the out-of-plane seismic behavior of confined masonry walls. The former was determined using the unidirectional strut method and the latter using a plastic analysis. Analytical strengths of confined walls are determined… Continue reading

Burnt . Search Brick Products

Brick masonry laid with cement mortar is stronger and more durable than that laid, with lime mortar. Mortar used should be as stiff as possible. All the joints should be of equal thickness and the ‘thickness of each should not… Continue reading

What Is Quick Set For TCC Materials

When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. This product is suitable for both interior and exterior applications. I love how the colors play off the… Continue reading

Historic Wall Construction Moisture Dynamics Masonry Fabric

For more Building& Remodeling videos & Best Practices visit my blog at www.MattRisinger.com See Kristof’s Podcast here: …historic masonry - Historic Masonry Wall Construction It does not cost the contractor any more money to remove another 1/4 inch of material during preparation more...

What Is Considered Full Depth Veneers Installation

We never see a cement walk, wall or slab. Why are so many buildings invariably built of masonry? No other material leaves as lasting an impression of strength, quality and substance as that conveyed by brick, block and stone. Stucco… Continue reading

Studios Singapore

We have been experimenting with pastel colours for some of our projects so check out this sexy doodle of ours! insert project description here– —– Masonry Studios is a 3D animation and motion design studio based in Singapore. We create… Continue reading

Antifreeze Division Unit Masonry

Panels should be at least 4’x6’. The existing masonry mortars with traditional light-weight fillers have low grade strength, and their do not gain the minimum required strength at hardening at low temperatures. Heating prepackaged materials such as cement and hydrated… Continue reading

Vibrating Vibration Based Monitoring Diagnosis

The material hose may include various types of fittings and couplings that connect to the pump or any line reducers at the pump discharge. Using rocks larger than this size in the material could clog the pump and material hose.… Continue reading

Characteristic Compressive Strength Of What Difference Between Minimum

The slenderness ratio, in turn, depends upon the effective height (or length) and the effective thickness of the wall or column. This video talks about the constituents of the concrete,. It explains the meaning of characteristic strength and target mean strength…Verifying Compressive Strength more...

Stress Of Shear Strength Concrete Masonry

It is necessary for the pore size of the brick material to be greater than 0.05 mm for a mechanical bond to be formed, and also for the cement to be properly hydrated behind the ettringite layer, despite the withdrawal… Continue reading

Jack Flat Also Called Arch

One of the primary objectives of the current study was to evaluate the longitudinal force exerted on the bridge due to increased axle loads of freight wagons. Three-dimensional numerical modeling and analysis was carried out to identify the critical locations… Continue reading

Different Types Of Brick Bonds

This bond permits better alignment and as such it is used for walls curved on plan. A wall having continuous vertical joints does not act as a homogeneous mass to distribute the superimposed load. Defective arrangement of bricks reduces the… Continue reading