Also, you can expect that anyone who hires you to do masonry contracting work will ask you to provide them with proof that you carry general liability insurance coverage. Why this rating is the most accurate. Masonry has a proud tradition, but you just need to get some stuff done around the house more...
Scott do more than get the details right: they get the right details. The gases then exit the stove through a chimney connection at its base. The basic principle is that gases fill up a volume of space no matter the size or the shape with hottest gases rising to the top of the container and cool more...
I had to cut through two layers of old sealant. The lower section of the cap is keyed in the concrete and the top section strips to create a reservoir for sealants. Easily stripped by inserting a screwdriver and pulling up. Ideal for use with plural injection type systems. Dual durometer seal p more...
Make sure to match the cut to the width of the crack. Our standard range featured in this brochure includes a wide selection of floor, wall, ceiling, exterior and car park models to suit most situations. The total movement of the bridge deck is divided among a number of individual gaps which are more...
In several places, the brick veneer has moved, cracking and causing misalignment as pictured. This is on the basement level, on the walkout side of the basement. Assuming the repairs have worked and the veneer in fact is no longer moving, what are my options for fixing the gap? It also provides more...
Thermal movement is not normally allowed for in internal brick walls. Temperature will also cause brick to expand and contract. This can be done by knowing the coefficients of expansion of the brickwork and the parameters of its environment. In effect, tensile stresses act against the weakest p more...
During construction of concrete masonry wall, causing it to expand. Joint reinforcing is generally terminated at a control joint, although chord-reinforcing steel at floors and roofs must continue through the control joints. Cap all dowels to allow 1” of movement. There is horizontal joint rei more...