Pl S10 Crack Sealan Buy LOCTITE Polyurethane Concrete




Joint depths greater than 1/2″ without the use of backer rod. Create a queue, but don’t obliterate an existing one! This sealant is elastic and remains flexible to expand and contract with construction material movement to protect and retain the original seal. Joint depths greater than 1/2″ without the use of backer rod. Create a queue, but don’t obliterate an existing one! Forming water and weatherproof seals in all exterior concrete and masonry gaps and joints. Do not use soapy water as this may cause the surface to discolor. Protect open containers from heat and /or direct sunlight. The depth of the sealant should be half the width of the joint. Sealant skins within 24 hours, is functional within 3 days and reaches full cure in about 1 week.

Concrete Crack and Masonry Non Sag Polyurethane Sealant Loctite Adhesives

Underwater applications or permanent water immersion. Applications requiring temperature resistance greater than 180 deg. Joint depths greater than 3/8\” (9.5mm) the sealant may bubble if applied too deep or if substrate is not absolutely dry. Tack-free in 2 hours and fully cured in 5 to 8 days. Fills joint depths up to 1/2\” without the use of backer rod. Resistance temperature up to 200 deg.

Leave a Reply