Paint Sealer BEHR PREMIUM® Basement Masonry
Seems to me why paint something if it’s going to add to the maintenance list of future work when it starts peeling and what not.
What type of paint do you believe would be superior?
There are clear, solid and textured finishes to choose from for brick, cement board, concrete and stucco. Elastomeric coatings can be an attractive choice for specifiers or owners because of their durability; many manufacturers offer a 10-year warranty versus the typical two-year warranty for conventional coatings.
However, the required wet film thickness for many elastomeric systems is 27-32 mils wet. Behr wet look sealer barely changed the appearance of the stamped concrete surface even after two coats. Behr description for wet look is very misleading. Be sure to choose a waterproofer made from a heavy duty resin for maximum adhesion, and that resists the growth of mold and mildew.
Ideal for basement and retaining walls.
Should a masonry foundation be painted – Behr Paint Masonry Sealer
The same coating manufacturer and product should be used (same on same) to keep the warranty intact. Once the surface is dry, the painter must now achieve a non-visible touch-up, which is no easy task. The whole wall may then be powerwashed again, and repainted edge to edge. This is why you need about 3 times as much paint as for any other surface. Seattle everything is damp so no problem). Which brings on my biggest peeve why do people paint brick?
If it does peel off, its because they did not wash splashed on dirt before applying. Moisture gets behind the paint and makes it peel. But a good paint job with latex paint won’t peel. The paint soaks into the concrete and forms a very tight bond. If using a power washer, be sure not to force excess water into mortar joints or other areas. Be sure to protect yourself during this process by wearing goggles, gloves and a dust mask. Rough surfaces, such as cinder block, can be smoothed out by applying a latex block filler before painting. It helps the finished paint job look smooth and uniform, and reduces chance of fading. When painting stucco that is more than a year old, first prepare the surface by removing any traces of efflorescence with a scraper or wire brush.
Then proceed by applying a top quality 100 percent acrylic latex paint. Hayneedle, we transformed a dark, dank and general dumping ground of a storage space into a cozy ski lodge inspired family room. Earlier this year my friend asked for some advice on how to better use this space in her basement. They loved to ski so a loose interpretation of a ski lounge was incorporated into the styling. Iowa, which means the whole town will probably be out and about this weekend, including this party of three. I read about dealt with pavers or concrete that is walked on etc regularly. If applied to thick or over applied it wil result in milky cloudy appearance. I think the directions say a light coating. It has been on my patio for two years and still looks great. Milky white spots that do not go away.
Ruined my beautiful living and dining room floors!. It turned our stamped concrete patio into a horrible blotchy white mess. The patio is ruined and no one knows how to get the stuff off of it. Media blasting will ruin the stamped concrete and its specially tinted colors. After couple weeks anything hits it the finish and stain peels off. . It was beautiful and vibrant until this nasty sealer went on it. The stones look lost in the concrete. The patio glistens in the sun today and the sealer brought out the colors in the brick. I applied the sealer using an inexpensive hand pump sprayer and backrolled for an even spread. Approximately 50% looks decent and the other 50% has large milky haze and/or white marks that look like chalk marks!
Furthermore, by walking on the driveway and sidewalk you can see that it is well sealed, not milky, and it is quite glossy.
I power washed, waited 24 hours to let it dry, and then applied 2 gallons of this milky crap with a 3/8 inch roller, for a high gloss finish that never happened.
I have no idea how to get off!!!
Remove any puddles by spreading product to drier areas or by wiping up excess with a clean cloth.
On vertical surfaces, apply from the bottom up and saturate well.
Do not paint horizontal surfaces after applying this product.
Properly dispose of all soiled rags and protect unused product from freezing.
Silicone to penetrate into the surface to help keep water out and shield against salt damage and corrosion. I was concerned as we got unexpected rain within 24 hours, but the product seems to have held up. So far, fairly satisfied with the product. Allow to dry 24 hours for light foot traffic. Clean with a mild, non-abrasive liquid detergent after 30 days.
The second gallon was a milky solution that gave the balance of the walk a low luster finish. Behr stain which was also applied precisely as directed. It was painted many times over the last 100 years. I read all of the reviews here and so was aware of the problems people were encountering. We brushed it on — had to because we needed to work it into the faux grout lines. We love how the floor now looks and feels!
Wipe off any visible moisture with a dry cloth before painting.
Additional spot application may be needed depending on the porosity of the surface.
Protect unused product from freezing.
Ideal for basement and retaining walls.
The basement is so much brighter and fresher smelling. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This water-base professional finish can be applied by brush, roll or spray for your convenience.
Dried film is mold and mildew resistant.
Provides a durable semi-gloss finish that withstands tough elements on both interior and exterior surfaces.
It blocks medium to heavy stains, and it’s tintable to allow for dramatic color changes. It’s also tintable, so it’s great when you’re looking to make a color change. It is ideal for use in moisture-prone areas. It’s also great for challenging surfaces like shutters, railings and wrought iron.
It’s also great for surfaces like railings and wrought iron.
It provides excellent touch-up to help maintain the look, and it can also be used on stucco, brick and other masonry, as well as fences.
It’s ideal for trim, doors, and windows, but it’s also great for shutters and outdoor furniture.
It’s ideal for trim, doors and windows, but it’s also great for shutters and outdoor furniture.
A premium quality, durable, 100% acrylic latex flat finish. It has excellent adhesion to various types of roofing materials and is tintable to match a variety of custom colors.
A high-quality, flat acrylic latex paint with excellent hiding properties. A high-quality, satin acrylic latex paint with excellent hiding properties.
How To Apply Behr Premium Low Lustre Sealer
BEHR PREMIUM® LOW-LUSTRE SEALER is a clear, non-yellowing, high solids, acrylic-based masonry sealer. It is formulated to …