Lat Works Logo

Lat Works Construction

Serving Brooklyn, Queens, Manhattan, NY

Loxon® Concrete Masonry PRIMER




We have proven solutions for the most challenging projects. It can be used on uncoated interior/exterior surfaces such as: concrete, masonry, stucco, cinder block and any porous stone or brick. Proper surface preparation is required. Patch all holes and cracks and allow to dry. Sprinkle a few drops of water onto the surface. It had/has great adhesion, there’s been no lime burn leaching to the surface and the paint looks great.

Loxon® Concrete and Masonry PRIMER SEALER OVER EXTERIOR BRICK

What’s the quickest way to paint brick?

If you have recently set bricks, you’ll want to let them dry for at least a year before painting. Repointing is the term for renewing the external part of the mortar joints between the bricks. If the brick is only slightly dirty, spray the walls with a garden hose. For interior brick, remove dust and cobwebs with a dust rag, feather duster or vacuum. After cleaning brick, rinse it and allow it to dry for at least 24 hours.

www.youtube.com/watch?v=sCJgHPhre8U

Last week we managed to clear down the old walls and after removing all sorts of nails and screws, gave it a fresh coat of paint.Acrylic Exterior Masonry Primer – Masonry Primer


It had/has great adhesion, there’s been no lime burn leaching to the surface and the paint looks great. For new fresh concrete, and even concrete that has weathered, we must get the surface to a neutral ph. Masonry curing rates will vary, depending on temperature, air movement, and project conditions. You have a couple of options with respect to choice of coating systems. New concrete must cure for a minimum of 30 days prior to priming. Do not apply over previously coated surfaces. Do not dispose of this product down a drain. For impregnating plaster, masonry, concrete cement, etc. Only seal masonry if you have to do so. Patch all holes and cracks and allow to dry. Do not apply over previously coated surfaces. Stir thoroughly before and occasionally during use. Small cracks can be repaired with acrylic caulk. For exterior brick, use a natural brush with stiff bristles to remove cobwebs and dust. Acrylic latex is often seen as better for exterior brick because it is highly resistant to mildew and moisture. They reveal details and are easy to clean. If you experience eye watering, headaches or dizziness, increase fresh air. P series particulate pre-filter) may offer additional protection; obtain professional advice before using. Loxon is a quality, serious product, why buy a gallon of something for 50 buck to use what amounts to a pint.

 

Loxon® Concrete & Masonry Primer Sealer Over Exterior Brick

PRIMER OVER EXTERIOR BRICK Loxon® Concrete & Masonry Primer/Sealer Primer Preparations For Exterior Painting House …




Category: General Masonry, Coats & Finishes, Masonry Paint, Concrete
Tags: ,



Leave a Reply

Your email address will not be published. Required fields are marked *