Lat Works Logo

Lat Works Construction

Serving Brooklyn, Queens, Manhattan, NY

Industrial Hydrostop Sealer




Industrial  Hydrostop Sealer. Seal Moisture
Produce a hard, long-wearing, abrasion-resistant finish. They are more frequently used in exterior applications to protect against the harsh elements. They are great for enhancing colors and giving concrete the much desired wet look. Durable concrete coatings are harder and last longer than decorative coatings. Heavy weight, but packaged well with handles to lift and in pourable containers rather than awkward buckets. The only thing is it does not cover nearly as much as advertised on pavers. Unfortunately mortar is also very porous, and will quickly absorb water and moisture. They leave no film or coating on the surface, and will never flake or peel. At first, the cracks and fractures from wet/dry and freeze/thaw cycles are microscopic. What causes a concrete slab to fail? Our floor coating is used on trailers, truck beds, and boats as well. What is an electrical dig without field paint?

For use on vertical, flat, dense surfaces—brick/stucco walls, etc. Even in warmer climates, weather, abrasion and contaminants will weaken the substrate over time.

A premium interior/exterior waterproofing formula that uses the latest water-based silicone technology designed to penetrate …Euclid Chemical – Industrial Masonry Sealer

Industrial  Hydrostop Sealer. Seal Moisture

Provide excellent protection against outdoor exposure conditions. Ideally we wanted concrete sealers that were not only conveniently available but offered excellent performance. We were able to rule out any sealers that were too watered down or did not have enough active ingredients. Most brick masonry installations are held together with cement mortar between the bricks. Efflorescence is also a big problem on brick. Was this review helpful to you?

Delivered very quickly, and in great shape. Excellent service all the way around. Do not apply in temperatures below 45 degrees. Their job is to be there when you need them. The salts build up in the masonry pores from repeated wet/dry cycles. There are benefits and risks to each type. This type of penetrating sealer is highly effective in protecting structures from moisture, even in high-traffic, exposed areas. What is a highway without traffic striping paint?

Inferior swimming pool paint can lead to chalking, blisters, bubbles, and other defects that can damage a pool’s surface. Frost and mold are just a couple different types of water damage that may cause corrosion, deterioration, staining, and structural failure. Many sealers can also be colored with translucent or opaque tints. High-performance sealers such as 100%-solids epoxies, polyaspartic urethanes and polyureas require professional installation using special tools and application techniques. Almost all sealers can be applied after the concrete is 28 days old. Its like poring liquid plastic into your concrete. The natural abrasion of driving on concrete, weathering and car fluids that leak into the substrate also take their toll. This product penetrates into the concrete or masonry 2 – 4 inches and provides a paintable surface.


A low-pressure, pump sprayer works well and two coats are applied wet on wet. A pump-up garden sprayer is the best application tool. Silane molecules are able to penetrate the concrete deeper than the larger sized siloxane molecule so we wish this product used some silane. This low odor formula is safe to walk on in less than 2 hours and can be used on a wide variety of substrates including brick, stucco, stone, pavers and more.

After reading the reviews some consumers do not experience beading on new concrete; however, there were not enough reviews on the product to determine whether or not this was an isolated event.

Like paint, concrete sealers are available in a variety of finishes including natural, satin, wet look and gloss. Decorative acrylics are primary used to do as their name implies and decorate the concrete with a satin or wet look finish. What wet-on-wet means is that the second coat is applied before the first coat has dried. However, if you apply the second coat while the first coat is still wet you are able to get the product to penetrate as deep as possible and ensure the longest lasting performance.

Keep in mind that the natural finish products are penetrating and give the longest lasting, best protection. For consumers well versed in concrete, as well as for homeowners who just want to protect their homes, the plenitude of information is overwhelming.

To maintain protection and appearance, this sealer should have a maintenance coat every 3-4 years. Apply liberally to porous surface at a rate of 125-150 sq. For vertical applications, apply from the bottom up. Make sure all sprinklers are turned off for a 24 hour period of time. Allow surface to dry for a minimum of 8 hours before foot traffic and 72 hours before vehicle traffic. Manufactured / faux / cultured stone: 125 sq. Most importantly, with the pores of the concrete sealed, moisture can no longer saturate the concrete causing rebar corrosion and freeze damage. But efflorescence can also be caused by hydroxides and sulfates of either sodium or potassium, which are much more soluble in water than calcium.

The best defense against efflorescence is to stop it before it starts.

Hydrostop Sealer

Industrial Masonry Sealer
The majority of efflorescence problems with concrete involve decorative or colored concrete. To make matters worse, the majority of decorative projects have a protective, color enhancing clear coat applied over the stained or dyed concrete. Dusting is caused by vehicle traffic, foot traffic, machinery, sweeping etc. Always consult a concrete engineer immediately when weak concrete is discovered! Get the same increase in strength, but with the addition of brilliant color. The porous slab acts as a sponge, drawing moisture up from the ground. When this alkali rich moisture reaches the flooring adhesive it emulsifies and begins to deteriorate. The root cause is still the alkali, lime and moisture in the concrete attacking the paint. As steel begins to corrode within concrete, the bond between the two begins to break down and delamination and spalling often occur.

When steel rebar is used as reinforcement in extreme environments or where de-icing salts are present, rust and corrosion are a major problem. This protection is especially important in modern tilt up and precast thin wall construction. Mortar is much more porous than brick and natural stone, and quickly saturates with water from rain, snow, sprinklers etc. Greatly reduces infiltration of water vapor and gases. Able to penetrate through one layer of latex paint to seal the concrete below (not guaranteed). Cinder or split face blocks: 500-700 sq. I read this in the instructions and promptly wiped up the puddles in depressions, but they don’t tell you that they mean everywhere.

The surface needs to be dry, dry, dry!!

They even should say that you need to mop up the excess with water multiple times. Remove old paint, adhesives, oil stains, and efflorescence. Mask glass and finished surfaces against over-spray. Second was on a limestone/mason chimney which has been problematic for years. We had water squirting out of our masonry brick basement walls before using this. Safe for use indoors and outdoors. Disappears into concrete and will not change the appearance or friction of your outdoor concrete.


Why Use Drylok® Masonry Waterproofer?

Enjoy this video and, for more information, visit us at www. ugl. com Let’s face it, if your home has a basement you probably …




Category: Coats & Finishes, Masonry Paint, Concrete
Tags: ,



Leave a Reply

Your email address will not be published. Required fields are marked *