This bond ensures attractive appearance and full strength to the walls. In walls having their thickness equal to odd number of half bricks, bats are essentially used to achieve the bond. This type of bond is best suited from considerations of economy and appearance. Mortar is used as a joining medium in brick and stone construction. A joint is the mortar bond placed between individual masonry units such as brick, block or stone. It could also be a simple transference from the earlier name for this dent ‘frush’ or ‘frosk’, themselves contractions of fourchette or furchette.

English Bond

Half Brick Masonry Meaning

Flemish Bond – Half Brick Masonry Meaning

Half Brick Meaning. Vertical Bond

The triangular faces formed near the stretching faces are filled with pieces of bricks and not with mortar only. The vertical joints are broken by using a half brick bat in alternate course. Bat : it is the portion of the brick cut across the width. This bond is used-in half brick thick walls. Is it vertical or horizontal?

Victorian trades embraced this romantic (sic) custom during the industrial revolution, and it’s been with us ever since. If you are learning self sufficiency or looking for a professional skill, this video will help you grasp the basics of masonry. Bear in mind the count and arrangement of bricks before removing the dry bond. Set up the profiles guiding the first course of the two walls.


This bond is used when the bricks for the face work are costlier than the other bricks and as such the number of face bricks is economized by using more stretchers.

For example, the thickness of face bricks is 5 cm and that of back bricks in 3 cm. Water absorption is about 25%
of dry weight. Mortar acts as a cementing material and unites the individual brick units together to act asa homogeneous mass. Lime cement mortar known as guarded mortar or gauged mortar is made by mixingcement and lime. The mortar gives good and smooth plaster finish. Closer may be of various types, defined below. This is also known as queen closer half. If the length of the bat is equal tohalf the length of the original brick, it is known as half bat. Splays: these are special molded bricks which are often used to formplinth. Quoin: it is a corner on the external angle on the face side of a wall. If they are not arranged properly continuous vertical joint willresult. The pattern is used only when thethickness of the wall is equal to one brick. This is achieved by usingthree-quarter brick bats in each alternate courses as quoins. For walls having thickness equal to even multiple of half brick, nobats are require. English bond andappearance of flemish bond. Double flemish bond facing is done with good qualityexpensive bricks. Every stretcher course start at the quoin with a three-
quarter bat. Raking bond is not provided in successive courses. Garden wall bonds are of three types:
57 58. Due to this, it is necessaryto place a half-brick bat adjacent to it, in the main wall. Alternate courses of both thewalls remain unbonded. Lastly, clean up the area around the wall. It has relatively little structural value. The narrow side of the brick can be presented to the viewer but usually the wide side of the brick faces up. The stretcher and soldier alternate on each course. Soldiers stand on one edge of each step. If one viewed the horizontal paving as if it were the side of a vertical wall one could describe this bond as consisting of a course of one stretcher laid next to one soldier and this pattern is repeated for the course.

The narrow side of the brick can be presented to the viewer but usually the wide side of the brick faces up. One day we discovered the proper name for this pattern. Itconsists of a course of one stretcher laid next to one soldier and this pattern is repeated for the course.


How To Build A One And A Half Brick Wall Using An English Bond | Masonry

This video will get you started on building a one and a half brick wall using an English bond. This content aims to help beginners …