Lat Works Logo

Lat Works Construction

Serving Brooklyn, Queens, Manhattan, NY

Exterior Paint Textured Masonry

This product is not suitable for airless spray application. August 2015, 17:50is it that the application is more of a hassle with textured?

Sandtex for the textured stuff but it’s not the cheapest. Sandtex you should be fine with 2 coats but the textured stuff doesn’t spread as easy as the smooth so you will need more.

The other problem you may encounter going over such a rough surface is pinholing. See other buying options from other sellers. Ltr will cover approximately 32 m2 on smooth rendering.

Select Fine Texture Application – Watch & learn how to paint with Berger’s Select Fine Texture, a weather-resistant exterior wall …Difference Between Smooth and Textured Masonry Paint – Textured Exterior Masonry Paint

Exterior Paint Textured Masonry. Texture Surfaces Colour Brush Application

Excellent resistance to stains and dirt. This product can be tinted to any white or pastel colour, simply type in the colour reference and we’ll create an exact match. If the colour change is strong, more coats may be required. Do not apply when there is a risk of rain, air or substrate temperatures are likely to fall below 8℃ or when the relative humidity is above 80% during application or the drying period.

Crack resisting flexible paint film.

Textured Masonry

Textured Exterior Masonry Paint
Is the fine textured a thicker paint?

Ensure all surfaces are dry, clean and firm. The rendered surface must have cured for a minimum of 7 days. The appearance of the render must be dry. All surfaces must be dry before application. Coverage for two coats is 2 sq metres per litre. Stiff brush to remove flaking paint, dirt etc. Power wash if necessary to remove flaking paint, dirt etc. Check adhesion of render – hack off where necessary and repair. Wire brush loose & damaged pointing from brickwork joints and make good if required. Reface spalling and crumbling brickwork if required. Rollercoat and approved solvent. Mix with a paddle to a paintable consistency so the rollercoat just wants to drip off the roller or brush. Rollercoat is as easy to apply as other, standard masonry paints. Apply by brush to uneven surfaces though a thick pile 7” wide roller can be used. If you’re working with a large area – such as the exterior of a house – consider using a pressure washer to clean it.

Read the manufacturer’s instructions for drying time. Otherwise, a paint scraper or a wire brush will work. Read the manufacturer’s instructions for dry time. To prevent water leaks into your house, cover doors and windows with plastic and try to stay away from spraying near them. If you’re cleaning interior stucco, use a soap and water solution with a scrub brush. Let it dry before you move on to painting. This will create the most even finish. Fill in deep divots with an angled paint brush. Remove switch plates and cover the outlets with tape. For even coverage, work in four-foot sections using a zig zag pattern. Then use an angled brush to fill in those crevices where a roller can’t reach. You need to know which type of paint you have before you start your project. It is so tough because it has sand in it, and is guaranteed for ten years. Please enter color name, number, brand or description below. Sorry, we do not recognize the color you’ve entered. Please login to write your own review. May produce an allergic reaction. Needed a second tin to finish off the job. Be aware that coverage on the tin is only a guide as it will be dependant on how rough the finish is on your particular surface.

Neibour asked what colour are your posts ?

Home Make Over With Sandtex Masonry Paints And Decorating Expert Mark Bannister

Learn all about how to make over your home and give it a brand new look. Crown Decorating Expert Mark Bannister shows you …

Category: Masonry Cleaning, Masonry Paint
Tags: , , , ,

Leave a Reply